Hot Melt Adhesive Systems for the Precast Concrete Industry
Spray our high quality adhesive onto the foam form. |
Position in place. |
Concrete flooring is sectioned into place. |
Concrete moulds are made and ready to be laid. |
Power Adhesives TECTM glue guns and Tecbond adhesives provide the perfect solution for setting structural and architectural elements in forms used for positioning weld plates and foal elements.It is faster, easier and more cost effective than any other fixing system available to the industry such as magnets, welding, drill and bolt and double sided tape.
The adhesive does not require primer, sets almost instantly and has excellent release from form.
Tecbond adhesive is applied using heavy duty glue guns that can apply the adhesive in blobs, beads, or a spray pattern.
Suitable for bonding detail strips and other architectural elements in tilt up concrete forms. It eliminates the need to drill holes in the concrete floor for mechanical fasteners, eliminates clamps and provides a very fast one step process.
TEC 3200
400 watt, 43mm glue gun, optional plug-in temperature control modules, automatic standby.
High melt rate all-electric glue gun.Glue size: 43mm (1.75in) glue cartridges
Melt rate: Cartridges up to 3.5kg/hr (7.5 lb/hr)
TEC 6100
500 watt, 43mm glue gun with air assisted piston to dispense adhesive with no effort.
Requires compressed air supply.Glue size: 43mm (1.75in) glue cartridges
Melt rate: 4.1 kilos (11 lbs)/hr
TEC 6300
500 watt, 43mm glue gun that can dispense hotmelt adhesives in spray patterns.
Pneumatically-assisted for easy all day use. Requires compressed air.Glue size: 43mm (1.75in) glue cartridges
Melt rate: Cartridges up to 4.2kg/hr (9.5 lb/hr)
|